To choose the right Rexin for sofa upholstery, look for upholstery-grade material with a strong fabric backing, enough flexibility for your sofa's shape and documented durability suited to how often you use it. Compare PU and PVC options, check a physical sample, and ask your upholsterer to confirm the material and quantity before you order.
Should you choose PU or PVC Rexin?
Rexin is a common trade term for artificial leather, usually made with a polyurethane (PU) or polyvinyl chloride (PVC) coating over a fabric backing. Ask for the actual composition rather than relying on labels such as premium leatherette or soft-touch Rexin.
PU upholstery often feels softer and bends more easily. PVC upholstery often feels firmer and can offer a practical, wipe-clean surface. However, the formulation, backing and protective finish can make two products within the same category perform quite differently.
Don't assume that all PU is breathable or that all PVC is uncomfortable. Some materials combine coating types, while surface treatments can change how they feel. Compare finished samples rather than choosing by the polymer name alone.
Choose a material specifically sold for sofa seating. A sheet intended for bags, decorative panels or occasional-use furniture may look suitable but lack the flexibility or surface durability you need for regularly used cushions.
What backing and thickness should you choose?
The fabric backing matters because it supports the coating and helps the upholstery withstand tension around seams and corners. Inspect the back of the sample for a consistent knitted or woven structure, without loose patches, visible damage or separation from the coated surface.
Don't judge quality by thickness alone. A thicker sheet may feel substantial yet be difficult to shape around curved arms, while a thinner, well-made material may fit neatly. Ask for thickness in millimetres and weight in grams per square metre, then compare these alongside the construction and test results.
Ask your upholsterer to check whether the material stretches and recovers sufficiently for your sofa design. For deep buttoning, tight curves and piped edges, you'll need different material properties than for broad, flat panels. Too little give can make fitting difficult; excessive stretch can leave the seat looking loose.
Also check whether you need to repair the existing foam and seat support. New upholstery won't correct collapsed foam or sagging webbing, and unsupported areas can crease more during use.
Which durability tests should you check?
Ask for a technical data sheet and, where available, test reports for the exact product code you plan to buy. Don't rely on a general certificate for a different range as evidence of your chosen material's performance.
- Abrasion resistance: Ask which test method the laboratory used, what result it recorded and what endpoint it used. You can't directly compare results from different methods.
- Flex and adhesion performance: Look for evidence that repeated bending doesn't readily crack the coating or separate it from the backing.
- Seam and tear strength: Ask your upholsterer whether the backing can withstand stitching and tension at cushion corners.
- Colourfastness to rubbing: Check resistance to colour transfer during dry and damp rubbing, especially for strong colours.
- Hydrolysis resistance for PU: Ask about testing for breakdown caused by moisture exposure, which can contribute to peeling or flaking.
Don't treat a high abrasion count as a promise of a particular service life. The Association for Contract Textiles cautions that abrasion results alone don't predict how long an upholstery material will last; construction, care and actual use also affect performance.
If you have pets, ask specifically about scratch damage. Abrasion testing measures repeated rubbing, not resistance to claws, and a heavily textured surface isn't automatically scratch-proof.
Which finish and colour should you choose?
Judge comfort by sitting against a sample, not just brushing it with your fingertips. Hold it against your forearm and check whether it feels sticky, excessively slippery or stiff. Ask whether you can try it over a foam cushion for a more useful comparison.
You can usually wipe a smooth finish clean easily, while a deeply embossed grain can collect dirt in its recesses. Very glossy surfaces tend to make scratches and pressure marks more noticeable. A moderate sheen and shallow grain can be a practical choice for frequently used seating.
View a generously sized sample beside your flooring, curtains and other furniture under the lighting you normally use. Small swatches can give you a misleading impression of the colour and grain size. Pale upholstery may show dye transfer from clothing, while very dark shades can make dust and light-coloured marks more visible.
How to check a Rexin sample before buying
Use these checks to spot obvious problems before you place a full order. They don't replace laboratory testing or tell you how long the material will last.
- Bend the sample gently around a rounded edge and look for cracking, whitening or separation. Don't make a sharp crease.
- Examine the face and backing under good light for pinholes, uneven coating, patchy colour and inconsistent grain.
- With the supplier's permission, rub a spare piece with a clean white cloth, first dry and then slightly damp, and check for visible colour transfer.
- Ask your upholsterer to stitch a trial seam and inspect it for enlarged needle holes, tearing or puckering.
- Try the recommended cleaning method on a spare piece and check for dullness, stickiness or colour change after it dries.
Keep the approved sample and record its product code, colour code and batch details. Compare the supplied roll against it before cutting begins.
How to compare the full upholstery cost
Ask your upholsterer to calculate the quantity from actual measurements. Roll width, cushion construction, piping, grain direction and cutting waste all affect how much material you'll need, so don't rely on a standard quantity per sofa seat.
Compare quotations for the same usable width and specification. Include stitching, foam repairs, transport and any extra material you need for matching panels. A lower price per metre may not give you a lower total cost.
Get the care instructions in writing, including permitted cleaners and restrictions on disinfectants, solvents and conditioning products. Don't apply genuine-leather creams unless the material supplier specifically approves them.
Read the warranty for exclusions covering peeling, abrasion, dye transfer, scratches and cleaning damage. Ask how the supplier assesses a claim and whether replacement covers material alone or also the cost of reupholstery.