Rexin upholstery usually lasts 3 to 7 years with regular household use, but treat this as a broad estimate, not a guarantee. Basic material may wear out sooner with heavy use, while good-quality upholstery fabric can last longer on furniture you use occasionally. The coating, backing, seat construction and your cleaning routine all affect how soon you might see peeling, cracking or tearing.
How long does Rexin upholstery last with daily use?
For a sofa or chair you use frequently, judge its remaining life by the condition of the seating surface rather than its age alone. You may find that the backrest still looks fine while the front edge of the seat has already worn through.
Constant rubbing, repeated stretching and pressure concentrated in one spot usually cause the first visible damage. You put different stresses on dining chairs, office chairs and sofas, so don't expect the same fabric to last equally long on each.
Treat any promised lifespan cautiously unless the supplier explains the intended use and warranty conditions. Distinguish cosmetic changes from damage: fading or a slight change in gloss may only affect appearance, but peeling, open cracks and exposed backing tell you the cover is breaking down.
Does PU or PVC Rexin last longer?
When you buy Rexin, you're buying artificial leather, not a material with one fixed specification. Most varieties have a polyurethane (PU) or polyvinyl chloride (PVC) surface over a textile backing; you'll also find layered or blended constructions.
You'll often find PU upholstery softer and more flexible. However, some PU coatings are vulnerable to hydrolysis, a chemical breakdown involving moisture that can cause loss of strength, stickiness or peeling. You can read about the deterioration of plastics, including polyurethane, in the Canadian Conservation Institute's conservation guidance.
With PVC upholstery, you commonly get a surface that's easy to wipe clean and can withstand frequent use if you choose a suitable grade. You may still see stiffening, cracking or wear as the material ages and flexes repeatedly.
Grade matters more than the label: a well-formulated PU upholstery fabric can outlast a poorly made PVC alternative. You can't judge how long a cover will last from the material name, softness or thickness alone.
What causes Rexin upholstery to wear out faster?
You need more than a suitable coated fabric for upholstery to last. Even good material can fail early if the backing stretches too much, the stitching damages it or the cushion no longer supports it properly.
- Repeated friction: You can scratch or wear away the surface by sliding across seats or rubbing it with rough clothing and objects in your pockets. Pet claws can also cause damage.
- Unsupported folds: If you leave flattened foam unrepaired, loose creases can form in the cover, flex repeatedly and eventually crack.
- Excessive tension: If you stretch a cover too tightly, you put extra stress on seams, corners and curved sections.
- Direct sunlight and nearby heat: If you leave furniture exposed for long periods, you may see faster changes in colour, flexibility and surface condition.
- Unsuitable cleaning products: You can damage the coating or finish with strong solvents, abrasive pads and chemicals the supplier hasn't approved.
Pay particular attention to the front edge of the seat and the armrests. You touch and rub against these areas frequently, so you may notice damage there well before the rest of the furniture looks worn.
What should you check before buying Rexin upholstery?
Ask for an upholstery-grade fabric suited to how you'll use the furniture. You may find similar-looking material sold for bags, decorative panels or light craftwork, but it may not withstand daily stretching and flexing on a seat.
Request a technical data sheet covering abrasion resistance, flex resistance, tear strength, coating adhesion and colourfastness to rubbing. For PU material, ask specifically about hydrolysis resistance. The coating adhesion result tells you how firmly the surface layer bonds to the backing.
Check the test method as well as the result. You can refer to ISO 1419, published by the International Organization for Standardization, for accelerated-ageing tests on rubber- or plastics-coated fabrics. Use laboratory results to compare materials under the stated conditions, not as proof that a cover will last a particular number of years in your home.
Examine a reasonably sized sample, including its reverse side. Fold it gently and check for surface whitening, separation or an unusually weak backing. Read the warranty exclusions too, especially those covering peeling, abrasion, cleaning damage and uses other than normal household seating.
How can you make Rexin upholstery last longer?
Follow the fabric supplier's care instructions first, because finishes differ. If you don't have the instructions, clean cautiously and test any cleaning solution on a concealed area before using it on the visible surface.
- Remove dust with a soft cloth or a vacuum fitted with a soft brush attachment, especially around seams and seat gaps.
- Wipe spills promptly with a clean cloth rather than rubbing them across the surface.
- For routine dirt, use a lightly dampened cloth and a small amount of mild soap only if the care instructions permit it.
- Remove soap residue with a separate lightly dampened cloth, then dry the surface without soaking the seams or backing.
- Keep furniture away from direct sunlight and heat sources, and repair sagging cushions before deep folds develop.
Avoid leather oils and conditioners unless the supplier specifically approves them for your coated fabric. Don't assume products intended for genuine leather will suit PU or PVC. You can't restore a coating that has started breaking down by applying these products.
When should you repair or replace Rexin upholstery?
You may be able to get a specialist to repair a small, isolated cut if the surrounding material remains flexible and firmly bonded. For a split seam, you may only need restitching rather than a new cover, provided the fabric beside it hasn't torn or weakened.
Replace covers with widespread peeling rather than repeatedly polishing or patching them. If you notice flaking across several contact areas, persistent stickiness, spreading cracks or separation of the surface layer, don't expect a local repair to last.
You can usually replace the Rexin cover without replacing the furniture if the frame, joints and support system remain sound. Ask an upholsterer to inspect the foam and webbing at the same time. If you fit new material over collapsed padding, you won't fix the cause of repeated creasing.
Before approving reupholstery, compare the full cost of the cover, stitching, labour and any internal repairs with the price of replacement furniture of similar construction. Keep the new fabric's specification and care instructions so you can care for it correctly and refer to the agreed grade if a problem develops.
Sources
- Canadian Conservation Institute · Canada.ca (canada.ca)