Home

How Do PU and PVC Rexin Differ from Each Other?

PU and PVC Rexin are both artificial leather materials, but they differ in their coating, feel, flexibility and performance during use. PU Rexin generally feels softer and more leather-like, while PVC Rexin often has a firmer surface and offers good resistance to spills and frequent wiping. The better choice depends on the product, the quality of the fabric and how it will be maintained.

What Are PU and PVC Rexin Made Of?

Rexin is a common trade term for artificial leather made by applying a polymer coating to a backing fabric. PU stands for polyurethane, while PVC stands for polyvinyl chloride. Both can be embossed with a leather-like grain and supplied in different colours, thicknesses and finishes.

The backing may be knitted, woven or non-woven, and it contributes significantly to strength, stretch and stitching performance. The coating affects surface feel, resistance to wear and ease of cleaning. This means two materials labelled PU can perform quite differently if their backing, coating formulation or protective finish differs.

Some artificial leathers use a combination of layers rather than a single coating material. A product may have a PU surface finish over a PVC-based construction, so a soft touch alone does not confirm that it is entirely PU-coated. Ask for the material specification if the construction matters to your purchase.

How Do They Differ in Feel and Flexibility?

PU Rexin usually has a softer touch and bends more easily, which helps it follow curves and form folds without looking excessively stiff. This makes it a common choice for fashion bags, garment panels and upholstery where a supple feel is preferred. However, firm PU grades and soft PVC grades are also available.

PVC Rexin often feels fuller and firmer, especially in thicker upholstery constructions. Plasticisers are used to make PVC flexible, and their formulation affects how the material handles and ages. Compare samples of similar thickness and backing rather than assuming that every PVC fabric will feel rigid.

PU is often described as more breathable, but this needs qualification. Ordinary PU-coated fabric is not automatically breathable; moisture transfer depends on the coating structure and the complete construction. For seating, check comfort on an actual upholstered sample because foam, backing and surface texture also affect the experience.

Which Material Lasts Longer?

Neither PU nor PVC Rexin is always more durable. Resistance to rubbing, tearing, flexing and surface cracking depends on the grade and intended application. A material developed for light-use accessories should not be expected to perform like a tested upholstery fabric.

Some PU coatings are vulnerable to hydrolysis, a breakdown caused by moisture that can lead to peeling or crumbling. Different PU formulations have different resistance levels, so ask for hydrolysis test information when buying material for demanding use. A thick coating is not, by itself, proof of a longer service life.

PVC does not undergo the same PU hydrolysis process, but it can harden or crack as its formulation ages and plasticisers migrate or are lost. Surface wear, unsuitable cleaners and repeated flexing can also damage it. Any protective topcoat must be suitable for the expected cleaning and contact conditions.

For furniture and other heavily used products, request relevant abrasion, flexing, tear-strength and coating-adhesion test results. Compare results obtained using the same test method wherever possible. A single durability claim without a test method or stated application gives limited help.

How Do Cleaning and Water Resistance Compare?

Both PU and PVC Rexin generally resist everyday spills better than an absorbent, uncoated fabric, provided their surfaces remain intact. PVC is widely used where wipe-clean performance matters, but suitable PU grades can also be easy to maintain. Neither coating makes stitched seams, exposed backing or the finished product completely waterproof.

For routine cleaning, follow the supplier's instructions and start with a soft cloth lightly dampened with water. Use a mild soap solution only if permitted, remove residue and dry the surface with a clean cloth. Avoid soaking the material because moisture can enter through seams and damaged areas.

Solvents, abrasive pads and strong cleaning chemicals can damage either material. Do not assume that a fabric tolerates disinfectants simply because it is PVC or marketed as washable. Where repeated disinfection is required, obtain written compatibility guidance for the exact cleaning product and fabric grade.

Which Should You Choose for Your Product?

PU Rexin often suits products where softness, drape and a leather-like touch are priorities. PVC Rexin is often considered for firmer upholstery and other wipe-clean surfaces, particularly where purchase cost matters. These are starting points for selection, not fixed rules.

PVC is frequently cheaper than a comparable PU option, but backing quality, finish, thickness and performance requirements can change the price considerably. Compare the usable width and specification as well as the rate per metre. A cheaper roll may offer poor value if it tears during stitching or fails under the intended use.

  • For bags and accessories: Check fold behaviour, scratch visibility, edge finishing and strength around stitches.
  • For sofas and chairs: Check abrasion performance, stretch recovery, seam strength and comfort on an upholstered sample.
  • For frequently cleaned surfaces: Confirm compatibility with the proposed cleaners and check the care instructions.
  • For detailed stitching: Make a trial piece to check whether needle holes enlarge or the coating separates from its backing.

Before ordering a full roll, obtain a sample from the specified grade and test it with the actual foam, adhesive, thread and stitching method. Keep an approved reference sample so that the delivered material can be checked for colour, feel, backing and thickness before cutting begins.